5/16 Inch Nylon Bearing for Pinball Machine 20-8790-2
Standard snap-in nylon bearing. 5/16 inch inner diameter. 0.3125″ shaft diameter, 0.14 inch long, Type 7, standard snap-in bearing. Used
F14 Tomcat Left Ball Lock Gate Wire for Williams Pinball Machine 12-6736
Williams F-14 Tomcat pinball machine left ball gate wire. Reference part numbers: Ball Gate Assembly Pocket – Center left
Flipper Return and Drop Target Return Spring for Pinball Machine 10-364
The most common flipper return and drop target return spring for use on late model Williams, Bally and other brand
Pinball Machine Fuse Clip PCB Mount 1/4 Inch AGC MDL – FHPCB
Circuit board mount Fuse Holder Clip with .29 inch pin spacing that is used on most pinball machine power supply
Pinball Machine Hex Spacer 1/4 Inch F-F 6-32 x 1-1/4 Inches
Zinc plated brass female threaded hex standoff 1/4″ hex x 1-1/4″ length, 6-32 screw size. Parts reference numbers: 02-4252-20 Replaces
Pinball Machine Hex Spacer 1/4″ F-F 6-32 x 5/8″
1/4 inch hex standoff post with 2 female 6-32 threaded ends. Length is 5/8 inch.
Pinball Machine Screw 10-32 x 3/8″ Slot Hex Wash 237-5985-00
Screw #10-32 thread x 3/8″ long slotted hex washer head. Parts Reference Numbers: 237-5985-00 Replaces 237-5961-00
Pinball Machine Screw 6-32 x 2-1/2″ 4006-01027-40
Machine Screw 6-32 x 2-1/2″ long , phillips with round washer head. Common playfield post fastener. Part Reference Numbers:
Wire Gate 3.375 x 2.62 Inch Left Bend
Wire gate used on Data East / Sega / Stern pinball machines. Measures 3.375″ tip-to-tip overall width x 2.62″ inner
Wire Gate for Williams Pinball Machine 12-6731
Ball gate wire form for Williams pinball machines. Compatible parts reference numbers: 12-6731 Spinner wire Used in A-11387 spinner
#10-32 Tee Nuts 10 Pack
These nuts are used on virtually every pinball machine ever produced.
6-32 Tee Nuts 10 Pack
These nuts are used on virtually every pinball machine ever produced.